Publicidad
SAW STAND ASSEMBLY
UNPACKING
1. Remove all packing materials from around your saw.
2. Carefully lift the stand from the third styrofoam tray in the carton and place it on a level work
surface.
Components for assembling the stand are packed in a bag in the color box.
INSTALLING
1. Insert C into the square aperture of B and attach them with the external hexagon bolts (x2),
plain washers (x4), flexible washers (x2), and nuts (x2). (see Figure 1 & Figure 2)
2. Insert D into the square aperture of A and attach them with the external hexagon bolts (x2),
plain washers (x2), flexible washers (x2), and nuts (x2). (see Figure 1 & Figure 2)
3. Assemble A and B - Match their insert holes an attach them with the external hexagon bolts
(x2) and nuts (x2). (see Figure 3)
4. Attach the U-shape steel brackets (A) on the stand with the external hexagon bolts (x2),
plain washers (x2), flexible washers (x2), and nuts (x2). (See Figure 4)
Figure 1
Figure 2
Figure 3
Figure 4
Publicidad
