BaByliss PRO FXX3C Instrucciones De Operación página 10

Lubrication
1. Apply a few drops of the oil to the space between the fixed
comb blade and moving cutter blade. Apply the oil to the
clipper before and after each use.
VERY IMPORTANT
Blades must be cleaned and oiled on a regular basis so they
will function properly. Failure to regularly clean and oil the
2. Set the taper control to 2.0 and then remount the blade on
the clipper.
About the Lithium-Polymer Battery Pack
To ensure that the new battery reaches its full potential, the
battery should be drained to a rapid-flashing red LED after the
first use. This operation will only have to be performed once. The
unit should then be fully charged until blue LED appears.
Note: It may take 5-10 charging cycles for the battery to reach
its full potential.
blades will void the warranty.