sunjoe iON100V-24HT-CT Manual Del Operador página 2

17. Check for damaged parts – Before further use of the
appliance, a guard or other part that is damaged should
be carefully checked to determine that it will operate
properly and perform its intended function. Check for
alignment of moving parts, binding of moving parts,
breakage of parts, mounting, and any other condition
that may affect its operation. A guard or other part that
is damaged should be properly repaired or replaced.
Contact the Snow Joe
service center at 1-866-SNOWJOE (1-866-766-9563)
for assistance.
Additional Safety Rules for
Hedge Trimmer
1. Remove any adjusting key or wrench before turning
the power tool on. A wrench or key left attached to
the rotating part of the power tool may result in
personal injury.
2. If devices or facilities are available for the extraction
and collection of dust, ensure these are connected or
properly used. Use of these devices can reduce dust
related hazards.
3. Remove any blade that has been damaged. Always make
sure that the blade is installed correctly and securely
fastened before each use. Failure to do so can cause
serious injury.
4. Hold the hedge trimmer by insulated gripping surfaces
only, because the cutter blade may contact hidden
wiring. Cutter blades contacting a "live" wire may electrify
exposed metal parts of the power tool and could give the
operator an electric shock.
5. Maintain a firm grip on both handles while cutting with
the blades. Keep the blades away from body.
6. Hold hedge trimmer properly, e.g., with both hands if
two handles are provided. Loss of control can cause
personal injury.
7. Check the hedge for foreign objects before operation,
e.g., center fences. Take care that the cutting device does
not come in contact with wire or other metal objects.
8. Service on the product must be performed by qualified
repair personnel only. Service or maintenance performed
by unqualified personnel could result in injury to the user
or damage to the product.
9. Keep all parts of the body away from the cutting blades.
Do not remove cut material or hold material to be cut
when blades are moving. Make sure the switch is off and
the battery is removed when clearing jammed material. A
moment of inattention while operating the hedge trimmer
may result in serious personal injury.
10. Carry the hedge trimmer by the handle with the cutting
blade stopped. When transporting or storing the hedge
trimmer always keep the blades covered. Proper handling
of the hedge trimmer will reduce possible personal injury
from the cutter blades.
+ Sun Joe customer
® ®
11. Do not use the hedge trimmer if the switch does not turn it
on and off. Any power tool that cannot be controlled with
the switch is dangerous and must be repaired.
12. Use the hedge trimmer and accessories in accordance
with these instructions, taking into account the working
conditions and the work to be performed. Use of the
power tool for operations different from intended use
could lead to a hazardous situation.
Training
1. Read the instructions carefully. Be familiar with the
controls and the proper use of the product.
2. Never allow people unfamiliar with these instructions or
children to use the product. Local regulations can restrict
the age of the operator.
3. Keep in mind that the operator or user is responsible
for accidents or hazards occurring to other people or
their property.
Preparation
1. This product can cause serious injuries. Read the
instructions carefully for the correct handling,
preparation, maintenance, starting and stopping of the
product. Become familiar with all controls and the proper
use of the product.
2. Never allow children to use the hedge trimmer.
3. Never operate the product while people, especially
children, or pets are nearby.
4. Dress properly. Do not wear loose clothing or jewellery,
which can be caught in moving parts. Use of sturdy
gloves, non-skid footwear and safety glasses is
recommended.
5. Wear eye protection and stout shoes at all times while
operating the product.
6. If the cutting attachment strikes any foreign object or the
product starts making any unusual noise or vibration,
switch the product off, remove the battery, allow the
product to stop and take the following steps:
– inspect for damage;
– check for, and tighten, any loose parts;
– have any damaged parts repaired or replaced with parts
having equivalent specifications.
Operation
1. Use the product only in daylight or good artificial light.
2. Never operate the product with damaged guards or
shields or without guards or shields in place.
3. Keep hands and feet away from the cutting device at all
times and especially when switching on the motor.
4. Before using the product and after any impact, check for
signs of wear or damage and repair as necessary.
5. Always remove the battery
2