Residual Risks - sunjoe iON100V-24HT-CT Manual Del Operador

– whenever leaving the product unattended;
– adjusting the working position of the cutting device;
– before clearing a blockage;
– before checking, cleaning or working on the product;
– after striking a foreign object;
– whenever the product starts vibrating abnormally.
6. While operating the hedge trimmer, always ensure that
the operating position is safe and secure, especially when
using steps or a ladder.
7. Do not operate the hedge trimmer with a damaged or
excessively worn cutting device.
8. Always ensure that all handles and guards are fitted
when using the hedge trimmer. Never attempt to use
an incomplete hedge trimmer or one fitted with an
unauthorized modification.
9. Always use two hands to operate a hedge trimmer fitted
with two handles.
10. Always be aware of your surroundings and stays alert for
possible hazards of which you may not be aware due to
the noise of the product.
11. Take care against injury to feet and hands from the
cutting device.
12. Always ensure that the air vents are kept clear of debris.
13. Wear slip-resistant foot protection and protective clothing
when using this product.
14. Always keep proper footing and operate the product
only when standing on a fixed, secure and level surface.
Change working positions regularly to avoid tiredness and
ensure a comfortable working position at all times.
15. Never use replacement parts or accessories not provided
or recommended by the manufacturer.
16. The use of this product may be restricted by regional or
local regulations.
Vibration + Noise Reduction
To reduce the impact of noise and vibration emission, limit the
time of operation, use low-vibration and low-noise operating
modes as well as wear personal protective equipment.
Take the following points into account to minimise the vibration
and noise exposure risks.
1. Only use the product as intended by its design and
these instructions.
2. Ensure that the product is in good condition and
well maintained.
3. Use correct attachments for the product and ensure they
are in good condition.
4. Keep tight grip on the handles/grip surface.
5. Maintain this product in accordance with these instructions
and keep it well lubricated (where appropriate).
6. Plan your work schedule to spread any high vibration tool
use across a longer period of time.
Emergency
Familiarize yourself with the use of this product by means
of this instruction manual. Memorize the safety directions
and follow them to the letter. This will help to prevent risks
and hazards.
1. Always be alert when using this product, so that you can
recognize and handle risks early. Fast intervention can
prevent serious injury and damage to property.
2. Switch off and remove the battery if there are
malfunctions. Have the product checked by a qualified
professional and repaired, if necessary, before you
operate it again.

Residual Risks

Even if you are operating this product in accordance with all
the safety requirements, potential risks of injury and damage
remain. The following dangers can arise in connection with the
structure and design of this product:
1. Health defects resulting from vibration emission if the
product is being used over long periods of time or not
adequately handled and properly maintained.
2. Injuries and damage to property due to broken cutting
attachments or the sudden impact of hidden objects
during use.
3. Danger of injury and property damage caused by
flying objects.
m
WARNING!
This product produces an electromagnetic
field during operation. This field may under some
circumstances interfere with active or passive medical
implants! To reduce the risk of serious or fatal injury, we
recommend persons with medical implants to consult their
doctor and the medical implant manufacturer before operating
this product.
3