NOT EP4760F4 032052
9 • Clean the trimmer head.
Stop the appliance and unplug it.
Press the release button to remove the
epilator head (fig.21).
Remove the comb and clean hair from
the trimmer head with the brush (fig.22).
Rinse the trimmer head under cold tap
water for 5 or 10 seconds (fig.23).
Shake the trimmer head vigorously and
dry it with a towel.
10 • Lubrication
To keep your appliance working
effectively, the blades should be oiled
regularly (notably after washing in
water) using the lubricant supplied or, if
you have none, with the type of oil
used for sewing machines.
Stop the appliance and unplug it.
Clean the trimmer head with the brush.
Lubricate the blades (fig.24): one drop
11 • Environment protection first
Your appliance contains valuable
materials which can be recovered or
recycled.
GUARANTEE
Your appliance is designed for use in the
home only. It should not be used for
professional purposes. Any commercial
use, inappropriate use or failure to
comply with the instructions, the
22/03/07
10:55
IMPORTANT
Systematically clean the appliance's
trimmer head after each use.
IMPORTANT
The appliance must not be
submerged in water. It must not be
used in the shower or bath.
is enough.
Run the trimmer for a few seconds.
Clean the excess oil off with a cloth.
IMPORTANT
Avoid applying alcohol to the body
of the appliance so as not to fade
its colours.
Leave it at a local civic waste
collection point.
manufacturer accepts no responsibility
and the guarantee will not apply.
The guarantee becomes null and void in
the case of improper usage.
Page 16
GB