Tabla de contenido
Publicidad
ENGLISH
PORTABLE ELECTRO-HYDRAULIC PUMP
26
1. GENERAL CHARACTERISTICS
26-2
27
13
B70M-P24
PUMP TYPE:
B70M-P24-KV
Max operating pressure
bar (psi):
Oil supply
litres/min (gpm):
Weight with battery
kg (lbs):
Degree of protection:
Motor
Volt DC:
Battery:
Battery charger supply
Volt / Hz:
220 - 240 / 50 - 60
Oil reservoir capacity
cm
(gal.):
3
Recommended oil:
AGIP ARNICA 22 or ESSO INVAROL EP22 or equivalent
Recommended oil for "KV"versions:
AGIP ITE 360 or ESSO TRANSFORMER P60 or equivalent
Dimensions:LxWxH
mm (inch.):
38
Safety: the pump is fitted with a maximum pressure valve and pressure switch; MPC1 gauge, is
580
available upon request (see pag. 42) to check the proper setting of the pressure switch.
Acoustic Noise (Directive 2006/42/EC, annexe 1, point 1.7.4.2 letter u)
46
– The weighted continuous acoustic pressure level equivalent A
at the work place L
is equal to .................................................................................63,9 dB (A)
pA
– The maximum value of the weighted acoustic displacement pressure C
at the work place L
is ........................................................................................< 130 dB (C)
pCPeak
– The acoustic power level emitted by the machine L
is equal to ...................................................................................................................74,5 dB (A)
37
WARNING:
20
The hydraulic pumps manufactured by Cembre S.p.A. have been developed to
19
be used with crimping or cutting heads. According to this specific use, they do
not need and are not equipped with a safe oil non-return system.
*
For this reason, use in different applications from that intended (for example with
16
hydraulic jacks, lifting systems or similar) can be dangerous for the operator.
Cembre S.p.A. does not accept any liability arising from the use of its hydrau-
lics pumps for applications different from those listed in its catalogues or other
documentation.
48
15
9
31
B70M-P24A
29
B85M-P24
5
B70M-P24A-KV
32
700 (10,000)
850 (12,150)
0,6 (0.16)
0,5 (0.13)
9,2 (20.2)
10 (22)
IP 54
24
MAKITA type BH 2433 24 Volt NiMH
120 / 50 - 60
220 - 240 / 50 - 60
1000 (0.26)
28
38
560
390x163x323 (15.3x6.4x12.7)
519
43
14-7
61
14
25
24
WA
22
23
17
17
6
21
7
Torque setting
18
8
*
Nm
16
50
44
30
33
30
31
11
39
49
200
35
Lbf ft
37
22
3
44
58
57
59
56-1
56
40
2
41
56-1
56
42
66
59
58
10
*
44
50
64
65
4
12
63
62
TABLE 2
- TABLEAU 2 - TABELLE 2
- TABLA 2 - TAVOLA 2
3
54
55
51
60
53
Publicidad
Tabla de contenido
