Replacing The System Outer Foil And The Inner Blades; Replacing The Inner Blades; Cleaning With The Brush; Removing The Built-In Rechargeable Battery - Panasonic ES4029 Instrucciones De Operación

Replacing the system outer foil and the inner
blades
system outer foil
inner blade
Replacing the system outer foil

Replacing the inner blades

2 3
ES4029_EU.indb 5
once every year
once every two years
1. Press the system outer foil
release buttons and lift the
system outer foil upwards as
illustrated.
2. Insert the system outer foil by
pushing it downwards until it
clicks.
1. Press the foil frame release
buttons and lift the outer foil
section upwards as illustrated.
2. Remove the inner blades one
at a time as illustrated.
•
Do not touch the edges
(metal parts) of the inner
blades to prevent injury to
your hand.
. Insert the inner blades one at
a time until they click as
illustrated.
Cleaning with the brush
1. Clean the inner blades using
Removing the built-in rechargeable battery
Remove the built-in rechargeable battery before disposing of the
shaver. Please make sure that the battery is disposed of at an
officially designated location if there is one. Do not dismantle or
replace the battery so that you can use the shaver again. This
could cause fire or an electric shock. Replace it at an authorized
service center.
•
Remove the shaver from the charging adaptor when removing
the battery.
•
Perform steps 1 to 6 and lift the battery, and then remove it.


For environmental protection and recycling of materials
This shaver contains a Nickel-Metal Hydride battery.
Please make sure that the battery is disposed of at an officially
assigned location, if there is one in your country.
the short brush by moving it in
direction.
Clean the system outer foil,
the shaver body and the
trimmer using the long brush.
• Do not use the short brush to
clean the outer foils.




5
2008/06/30 13:00:45