DeWalt DWH205DH Traducido De Las Instrucciones Originales página 15

DUST EXTRACTION SYSTEM
DWH205DH
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.
Technical Data
Voltage
Type
Contact pressure
Small head
Maximum drill bit diameter
Maximum drill bit length (overall)
Maximum drilling depth
Standard head
Maximum drill bit diameter
Maximum drill bit length (overall)
Maximum drilling depth
Tool compatibility
Weight
EC-Declaration of Conformity
Machinery Directive
Dust Extraction System
DWH205DH
D WALT declares that these products described under
e
Technical Data are in compliance with:
2006/42/EC, EN60745-1:2009+A11:2010, EN60745-2-6:2010.
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact D
the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of D
Markus Rompel
Vice-President Engineering, PTE-Europa
D WALT, Richard-Klinger-Straße 11,
e
D-65510, Idstein, Germany
07.01.2019
WARNING: To reduce the risk of injury, read the
instruction manual.
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
WALT one of the signal word. Please read the manual and pay attention to
e
these symbols.

DWH205DH

V 18
DC
1

N 80
mm 12
mm 180
mm 180

mm 26

mm 180
mm 180
Safety Instructions
DCH263 only

kg 1.5
Read all of this manual carefully before operating the attachment.
Also refer to the manual of any power tool that will be used with
this attachment.
General Safety Rules
WALT at
e
WALT.
e

Additional Specific Safety Rules for Dust
Extraction Systems
•
DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
serious injury.
WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
serious injury.
CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderate injury.
NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may result in
property damage.
Denotes risk of electric shock.
Denotes risk of fire
WARNING! Always observe safety regulations applicable
in your country to reduce the risk of fire, electric shock and
personal injury.
SAVE THIS MANUAL FOR FUTURE REFERENCE
a ) Keep work area clear. Cluttered areas and benches
invite injuries.
b ) Keep children away. Do not let children come into
contact with the tool. Supervision is required for those
under 16 years of age.
c ) Use appropriate tool. The intended use is described
in this instruction manual. Do not force small tools or
attachments to do the job of a heavy-duty tool. The tool
will do the job better and safer at the rate for which it
was intended.
WARNING: The use of any accessory or attachment or
performance of any operation with this tool, other than
those recommended in this instruction manual may
present a risk of personal injury.
Use dust mask to keep residual dust away from airways when
drilling and when servicing the tool or accessories.
EngLIsh
13