Clock / Calendar; Clock / Calendar Display; Set Clock / Calendar - Oregon Scientific RM998PS Manual Del Usuario

• The RF reception icon will appear and flash on the display
to indicate it is searching for the RF signal.
Once batteries have been installed in the clock, the reception
icon will flash to indicate it is searching for a signal.
When the reception signal has been received the reception
icon will show the signal strength by displaying between 0
and 3 waves:
STRONG SIGNAL
To turn the radio reception OFF:
• Press and hold for 2 seconds.
• The RF reception icon will disappear from the display.

CLOCK / CALENDAR

CLOCK / CALENDAR DISPLAY

Press the CLOCK button to toggle between 3 types of
display:
CLOCK WITH SEC CLOCK WITH DAY
NO SIGNAL
CLOCK WITH ZONE
TIME OFFSET

SET CLOCK / CALENDAR

Before you can manually set the clock and calendar, you
must specify the current time zone you live in and the time
format (12- or 24-hour) as follows:
1. Press and hold CLOCK for 2 seconds. The time zone
offset hour digits will flash. When an offset hour has been
set (e.g. +1, the time displayed will be the RF clock time
plus 1 hour).
2. Press or to change the setting.
3. Press CLOCK to confirm the setting and move onto the
next one.
4. The settings appear in the following order: Time zone
hour offset, 12 / 24 hour format, hour, minute, year,
MM / DD or DD / MM format, month, day and language
for day of the week and talking clock.
5. Press CLOCK or ALARM to exit the Clock Setting Mode.
NOTE The following talking clock languages are available
with these models:
• RM998PS – English, Italian, French and Spanish.
• RM998PG – English, Italian, French and German.
6