Ce Conformity Declaration; Disposal Notes - Multiplex HFMG4 M-LINK Manual De Instrucciones

17. O : C
PTION ONNECTING THE
T -D
ELEMETRY ISPLAY
The 2.4 GHz HFMG4 M-LINK RF module is fitted with a socket
marked "COM" to which the MULTIPLEX Telemetry-Display can
be connected ( 5.,  7.).
The "COM" socket is located above the "SET" socket at the
right-hand edge of the circuit board of the RF module; the pin
assignment is also printed adjacent to the socket.
If you use the Telemetry-Display you can exploit the telemetry
functionality of the M-LINK system in conjunction with telemetry-
capable M-LINK receivers and sensors.
Information on connecting the Telemetry-Display and its charac-
teristics can be found in the operating instructions supplied with
the unit.
18. U
PDATING THE
The 2.4 GHz HFMG4 M-LINK RF module can be updated via
the "COM" socket, and is therefore future-proof.
The "COM" socket is located above the "SET" socket at the
right-hand edge of the circuit board of the RF module. The pin
assignment is also printed adjacent to the socket.
To update the module you require the MULTIPLEX Launcher PC
program, which is available as a free download from the website
www.multiplex-rc.de. You will also need the UNI USB PC lead
(# 8 5149).
Operating Instructions
HFMG4 M-LINK 2.4 GHz RF Module
# 4 5182
( )
RF
MODULE
CE C
19.
ONFORMITY DECLARATION
This device has been assessed and approved in
accordance with European harmonised directives.
This means that you possess a product whose design and
construction fulfil the protective aims of the European Com-
munity designed to ensure the safe operation of equipment.
The detailed CE conformity declaration can be downloaded in
the form of a PDF file from the Internet under www.multiplex-
rc.de. It is located in the DOWNLOADS area under PRODUKT-
INFOS.
D
20.
ISPOSAL NOTES
Electrical equipment marked with the cancelled waste
bin symbol must not be discarded in the standard
household waste; instead it should be taken to a
suitable specialist disposal system.
In the countries of the EU (European Union) electrical
equipment must not be discarded via the normal
domestic refuse system (WEEE - Waste of Electrical and
Electronic Equipment, Directive 2002/96/EG). You can take
unwanted equipment to your nearest local authority waste
collection point or recycling centre. There the equipment will be
disposed of correctly and at no cost to you.
By returning your unwanted equipment you can make an
important contribution to the protection of the environment!
G
21.
UARANTEE
The company MULTIPLEX Modellsport GmbH & Co.KG accepts
no liability of any kind for loss, damage or costs which are due to
the incorrect use and operation of this product, or which are
connected with such operation in any way. Unless the law
expressly states otherwise, the liability on the part of MULTI-
PLEX Modellsport GmbH & Co.KG to pay damages, regardless
of the legal argument employed, is limited to the invoice value of
those products supplied by MULTIPLEX Modellsport GmbH &
Co.KG which were directly involved in the event in which the
damage occurred. This does not apply if liability is incurred
according to statutory law on account of intentional or gross
negligence.
We guarantee our products in accordance with the currently
valid statutory regulations. If you wish to make a claim under
guarantee, your initial course of action should always be to con-
tact the dealer from whom you purchased the equipment.
The guarantee does not cover faults and malfunctions which are
caused by the following:
 Incorrect or incompetent use
 Maintenance carried out incorrectly, belatedly or not at all,
or not carried out by an authorised Service Centre
 Incorrect connections
 The use of accessories other than genuine MULTIPLEX
items
 Modifications or repairs which were not carried out by
MULTIPLEX or by an authorised MULTIPLEX Service
Centre
 Accidental or intentional damage
 Defects due to normal wear and tear
 Operation of the unit outside the limits stated in the
specification
 Operation of the unit in conjunction with equipment made by
other manufacturers.
Page 16
/ L
IABILITY EXCLUSION