KS LEV Ci Manual De Instrucciones página 8

Please read the following instructions carefully and install your LEV
Ci, LEV Integra, Crux-i and eTen-i according to the steps detailed
below.
Your KS height adjustable seatpost is a precision piece of cycling
equipment that requires a specific understanding of bicycle
maintenance and assembly to install. If you are not certain you
have the appropriate skills or tools to properly install this product,
please contact your local bicycle dealer or service provider for
assistance.
Detailed installation and service videos for all models can be
viewed at http://kssuspension.com/support/tech-info/.
LEV Ci, LEV Integra, Crux-i and eTen-i use internal cable routing
and is designed to be compatible with bicycle frames that
provide for such cable routing.
DO NOT DRILL OR MODIFY YOUR FRAME IN ANY WAY. Doing so will
void the Warranty of LEV Ci, LEV Integra, Crux-i and eTen-i and in
most cases void the warranty of your bicycle. Modification of
your frame in any way may result in frame faliure which could
result in injury or death.
If you are unsure if LEV Ci, LEV Integra, Crux-i and eTen-i are
compatible with your frame, contact your bicycle frame
manufacturer or KS USA at www.kssuspension.com.
INSTALLATION
ATTENTION!
WARNING!
4
6