AKASO Brave 5 Manual Del Usuario página 6

Playback on PC
Connect camera to PC, camera will turn on automatically, screen will display: "Mass storage",
"PC camera", touch the one you need.
Mass storage: Enter MSDC to check files. Camera will be worked as removable disk.
PC camera: Camera will be worked as PC CAM.
Note: If you charge the camera by connecting it to PC, please turn off the camera after
connectiong the camera to PC.
Camera Maintenance
- When the camera is in idle, please keep it in dry shady place.
- Please turn off the touch screen function when using the camera underwater. The camera
might work abnormally because of underwater pressure.
- If lens is needed to be cleaned, firstly blow away the dust on the surface, then use cloth or
paper suitable for optical devices to clean. Detergent could be used if necessary.
- Please don't use organic solvent to clean.
- Please do not touch the lens by fingers.
- Please do not put the camera in moist or dusty place. Electricity leakage may cause fire.
- Keep the camera away from drops and bumps. It may cause damage to the parts inside.
- Keep the camera away from long time high temperature and strong sunshine to avoid being
damaged.
- Please note that the camera will get hot after using it for a long time. It is normal.
Troubleshooting
Q: Video files couldn't be played on computers
A: The software doesn't support .mov files. Or the computer doesn't support 4K display.
Q: Camera Footage is Distorted or Has Poor Quality
A: 1. Camera Housing May Have Condensation. Try to put the camera under sunshine for 1
hour or two.
2. Camera Lens May Be Faulty. Camera lens may have scratches or cracks causing videos and
photos to appear distorted. Inspect the lens for cracks and scratches.
3. Camera Sensor May Be Faulty. If photos and videos are corrupted or distorted your
camera's sensor may be faulty.
Q: Camera Will Not Work With My Memory Card.
A: 1. Try to use the memory card in other devices. If it doesn't work either, the memory card
may be faulty.
If it works on other device, check to make sure it is a minimum of a Class 10 SD card.
2. If the above steps prove that the memory card is functional, then the memory card slot
might be faulty. Please contact seller support for resolution.
7
How to take out the battery?
1. Unlock the battery cover as the picture ②.
2. Press the battery cover, then push the battery cover forward as the picture ③.
3. Take out the battery.
①
③
Contact US
For any inquiries, issues or comments concerining our products, please send E-mail to the
address below or call us. We will respond as soon as possible.
E-mail: cs@akasotech.com
US customer service line: (301)670-7335
②
④
8
English