Metra 95-7337B Manual De Instrucciones página 4

1. Locate the factory wiring harness in
the dash. Metra recommends using
the proper mating adapter from
Metra or AXXESS. Re-connect the
negative battery terminal and test the
unit for proper operation.
2. Attach the Double DIN brackets to the
Double DIN Trim Plate. (Figure A)
3. Slide the radio into the bracket/radio
housing assembly and secure using
the screws supplied with the radio.
(Figure B)
4. Reassemble dash in reverse order of
disassembly.
Kit Assembly 95-7337B
Double DIN/Stacked ISO
head unit provision
(Figure A)
(Figure B)
4