Care And Maintenance - VonHaus 3500076 Instrucciones De Uso Y Cuidado

SOCKET WRENCH QUICK START GUIDE
Push the QUICK RELEASE BUTTON on the head of the wrench to mount and unmount a socket.

CARE AND MAINTENANCE

Always properly maintain your tool. Check for
misalignment or binding of parts, breakage of
parts, and any other condition that may affect the
tool's operation. If damaged, have the tool repaired
before use. Many accidents are caused by poorly
maintained tools.
Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
Store out of reach of children and do not
allow persons unfamiliar with the tool or these
instructions to use the tool. Tools are dangerous in
the hands of untrained users.
Clean your tools immediately after use. Spray light
oil on areas that may be prone to rust.
VonHaus is a registered trademark of DOMU Brands Ltd. Made in China for DOMU Brands Ltd M24 2RW.
02
0518
IF YOUR TOOL SET CONTAINS A SOCKET WRENCH
QUICK
RELEASE BUTTON
SERVICE
Have your tool serviced by a qualified repair person,
using only identical parts where applicable. To
ensure safe operating conditions, always inspect the
tool before every use to ensure that it is in proper
condition and free from any damage or deformity.
Dispose of damaged tools immediately.
Ensure the tool is kept clean. After using the
tool, clean it (without using abrasive chemicals or
cleaning agents) and return it to its proper storage
place.
STORAGE
Store tools in a dry ans sheltered environment.