Care And Cleaning; Service And Customer Care - Kenwood KAX950ME Instrucciones

Ocultar thumbs Ver también para KAX950ME:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 34
stuffed kebbe recipe
outer casing
500g (1lb 2oz) lamb or fat-free
mutton, cut into strips
500g (1lb 2oz) bulgur wheat,
washed and drained
1 small onion, finely chopped
Important
Always use the bulgur wheat straight
away after draining. If it is allowed to
dry out, it may increase the load on
the mincer resulting in damage.
1 Using the fine screen, mince
alternate batches of meat and
wheat.
2 Mix. Then mince twice more.
3 Stir the onion into the mix.
4 Push through, using the kebbe
maker.
Filling
400g (10oz) lamb, cut into strips
15ml (1tbsp) oil
2 medium onions, finely chopped
5-10ml (1-2tsp) ground allspice
15ml (1tbsp) plain flour
salt and pepper
1 Using the fine screen, mince the
lamb.
2 Fry the onions until golden brown.
Add the lamb.
3 Add the remaining ingredients and
cook for 1-2 minutes.
4 Drain off any excess fat and allow to
cool.
To finish
1 Push the casing mixture through,
using the kebbe maker.
2 Cut into 8cm (3") lengths.
3 Pinch one end of the tube to seal it.
Push some filling – not too much –
into the other end, then seal.
4 Deep fry in hot (190˚C) oil for about 6
minutes or until golden brown.

care and cleaning

1 Loosen the ring nut manually or with
the spanner
all the parts in hot soapy water, then
dry. Don't wash any part in the
dishwasher. Never use a soda
solution.
2 Re-assemble.
3 Wipe the screens with vegetable oil,
then wrap in greaseproof paper to
prevent discolouring/rusting.
4 Remove the lid of the pusher and
store the sausage and kebbe
attachments inside.
5 If you keep the attachment on your
machine, put the dish/cover on the
tray as a dust cover.
sausage fillers/kebbe maker
Wash in hot soapy water and dry
thoroughly.
service and
customer care
UK
If you need help with:
using your attachment or
servicing, spare parts or repairs (in or
out of guarantee)
call Kenwood customer care on
023 9239 2333.
spares and attachments
call 0844 557 3653.
other countries
Contact the shop where you bought
your machine.
Designed and engineered by
Kenwood in the UK.
Made in China.
6
5
and dismantle. Wash

Publicidad

Tabla de contenido
loading

Tabla de contenido