Publicidad
initialization. Then numbers keep changing on the LED screen. When [000] appears again, the
initialization is done.
4) Keep pressing the key [FUN] till F5 appears
5) Keep pressing the key [FUN], and back to standby mode (time mode).
● Time setting
1) Standby mode, press the key FUN for 2 seconds till F1 appears.
2) Press the key ENT repeatedly till F6 appears on the LED screen.
3) Keep pressing the key FUN, the current time, such as 08:10, appears.
4) Press key ENT to regulate the time. Press the key FUN to move the cursor.
5) After time setting, keep pressing the key FUN till F6 appears.
6) Keep pressing the key ENT, and back to standby mode. Time setting is done.
※ Time returns to zero every time after the battery is taken out and needs to reset.
●Lock the watch:
1. Press the key FUN for 2 seconds till F1 appears on the LED screen.
2. Press the key ENT repeatedly till F7 appears.
3. Then press the key FUN for 2 seconds till a three-digit XXX appears on the LED screen
4. Press the key ENT to change the number. When the XXX is 181, it's unlocked.
Notice: Function F2, F3, F6, F8, can still be used after being locked, but F1, F4, F5, F7 can't .All
functions can be used after unlocking it.
※Special notes
Ten sets of scroll numbers can be reserved on the host. For example, when "1 002"
appears on the screen, it means that there was a number called before 002 and 002 is the
second number calls.
4
Publicidad
