Publicidad
Manual for Multi-function Calling System
(APE100 for Fixed Receiver APE1500/ APE2000)
Multi-function pager APE100 (hereinafter to be referred as APE100)
Fixed host/ receiver APE1500 or APE2000 (hereinafter to be referred as fixed host)
1. Function of the keys(For APE100)
CLR: Exiting EN: Sending
2. Read the In-line coding of the multi-function pager(For APE100)
Electrify the multi-function call button and the receiver. When the multi-function pager is on
"---"
standby (
showed on the screen), press the key
lights
at the same time), then release the key
3. Number Registering
【
1)
For fixed host
seconds, and F1 appears on the screen.
【
2)
For fixed host
number you want to be registered with the key UP/MOVE/DOWN.
【
3)
For APE100
till FS appears on the screen and the indicator light
MENU. With the prompt music ringing (both stationary and portable receiver), the
multi-function pager is back to standby.
【
4)
For fixed host
finished.
Notes: After the registration, do not press the key
powered off and restarted. If the key
initialized and the pager needs to be registered again.
4. Paging Operation
【
1)
For APE100
appears on the screen. Press the key number "123", then "123" appears on the screen.
The numbers can be changed with the key
【
2)
For APE100
the key EN. When the indicator light is off, the signal transmitting is finished and the
receiver displays the paging number at the same time.
: number changing/page turning
】
Make sure the fixed host is on standby, then press the key FUN for 3
】
Press the key ENT and 001 appears on the screen, then choose the
】
When the multi-function pager is on standby, keep pressing key MENU
】
Press the key ESC twice to back to standby, then the registration is
】
To enter a number, such as "001": Press the number key "1", then "001"
】
Keep pressing the key EN till the indicator light
for one second (the indicator lamp
is on, then, release the key
if the multi-function pager is
is pressed by mistake, the receiver needs to be
.
5
is on, then release
Publicidad
