Parts And Description; Installation - JBL ProFlora Manual De Instrucciones

(1) Parts and description

1 Mounting plate
2 Screws with wall plugs (2 of each)
3 Universal power unit, secondary with 2 m cable and plug
4 JBL pH Control measurement and control unit
5 Graphic display screen
6 Menu key
7 OK key
8 Selection keys
9 BNC connection for pH sensor
10 Connection for temperature sensor
11 CO inlet (screw hose fi tting for 4/6 mm hose)
2
12 CO outlet (screw hose fi tting for 4/6 mm hose)
2
13 Input socket for 12 V DC power supply
14 Release clip for mount
15 Temperature sensor
15a Suction pad for temperature sensor (2x)
16 Calibration stand
17 Calibration cuvettes (3 x)
18 pH 7.00 buffer solution
19 pH 4.00 buffer solution
20 Storage and revitalisation solution for pH sensors
21 Distilled water
22 CH Test Set
23 pH sensor (please purchase separately!)

(2) Installation

The illustration shows a typical
installation
1 CO
ment and control device
2 Universal power supply
2a Cable 12 V DC
3 pH sensors
4 Temperature sensors
5 CO
6 Check valve
7 CO
8 CO
pressure reducer
– 29 –
/pH control 12V measure-
2
reactors
2
special hose
2
storage cylinder with
2