Descargar Imprimir esta página

Safety Instructions; 2�2 Installing The Sensors And Connecting To The Power Supply - JBL PROFLORA CO2 CONTROL Manual Del Usuario

Ocultar thumbs Ver también para PROFLORA CO2 CONTROL:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 39
UK
!
Important notice beforehand:
Please don't forget to buy a new JBL PROFLORA CO
To guarantee you the highest reliability when using the included JBL PROFLORA CO₂ CONTROL, this control unit comes without a pH sensor� When
purchasing the unit make sure to also purchase a new pH SENSOR SET� Your specialist pet shop will have one in stock for you�
Dear customer,
Choosing to buy this highly modern JBL PROFLORA CO₂ CONTROL was an excellent decision� The latest measurement and control technology mea-
sures the pH value and temperature and regulates the pH value and supply of CO₂ reliably and fully automatically� This ensures luxuriant plant growth
and healthy fish� JBL PROFLORA CO₂ CONTROL has a coloured touch display for easy operation as well as a whole range of useful features never
before incorporated in equipment of this class� A simple multi-lingual menu guides you safely through all the menu points� The device is designed
for the control of the external solenoid valve JBL PROFLORA CO₂ VALVE� The complete equipment runs on low voltage (12V), providing the highest
possible safety�

Safety instructions

1� Operation only with solenoid valves JBL PROFLORA CO
2� Follow the safety instructions for handling CO
� These can be found on the CO₂ pressurised gas cylinders�
2
3� Children must be supervised to ensure that they do not play with the appliance and its power supply unit�
4� The appliance must not be used for any purpose other than that described in these instructions for use�
5� Do not operate or store the unit in places where there is a risk of frost�
6� Appliance may only be used indoors�
7� Appliance may only be used in a dry environment�
Disposal: Do not dispose of this device and the power unit in the normal household waste� Please follow your local disposal regulations for electrical
equipment�
1.
Parts and description
1
Top-hat rail
2
Screws with dowels (2 x each)
3
Power supply unit 12 V DC
4
JBL PROFLORA CO₂ CONTROL measuring and display unit
5
Coloured touch display
6
Input socket for power supply 12 V DC
7
Connection for temperature sensor
8
BNC connection for pH sensor
9
12 V DC output socket for connecting cable for solenoid valve
10 Temperature sensor
10a Suction holder for temperature sensor (2 x)
11 Connecting cable for solenoid valve
12 Holder for calibration cuvettes
13 JBL PROFLORA pH SENSOR SET (please purchase separately!)
16
pH SENSOR SET!
2
VALVE or CO
sets containing such a valve�
2
2
2.
Installation
The illustration shows a typical installation example�
1
2
8
9
9
4
6
1
Measuring and control device JBL PROFLORA CO₂ CONTROL
2
Power supply unit
3
pH sensor
4
Temperature sensor
5
CO2 reactor JBL PROFLORA CO₂ TAIFUN SPIRAL
6
Bubble counter with integrated backflow protection JBL PROFLORA CO₂ TAIFUN COUNT SAFE
7
Connecting cable for solenoid valve
8
Solenoid valve JBL PROFLORA CO₂ VALVE
9
Special CO₂ hose
2.1
Mounting the JBL PROFLORA CO₂ CONTROL measurement and control device
First attach the top-hat rail in a horizontal position to the desired position on the wall near the aquarium, using the two screws supplied� Hang the
rear bracket of the device on the upper edge of the rail and click it into place by applying slight pressure from the front� (It can easily be removed
from the top-hat rail at any time by sliding it sideways�)
2.2
Installing the sensors and connecting to the power supply
Connect the plug of the pH sensor and the temperature sensor to the corresponding connections on the appliance� Do not install the two sensors in
the aquarium until calibration is complete� Connect the JBL PROFLORA CO₂ VALVE solenoid valve provided to the measuring and control device
using the solenoid valve connection cable� The connection on the device is marked "valve"� Any previous power supply unit for the solenoid valve is
no longer needed� All the connectors and plugs on the device and all the sensors and cables are designed in such a way that an incorrect connection
is not possible� Plug the universal power supply unit into a nearby power socket and insert the plug on the cable into the socket labelled 12 DC on
the device�
B
C
D
E
1
4
3
B
C
D
E
5
!
UK
17

Publicidad

loading