AmazonBasics B07J4VK742 Manual Del Usuario página 7

Installation
Step 3 (optional): Adjustable Latch for Top Deadbolt
1
To change latch faces
1. Use a flat-head screwdriver to separate the face plate from back plate.
2. Snap the selected face plate onto the back plate.
Drive-in installation
• Make sure the round face plate is properly aligned as illustrated and snap it to the latch case.
Latch backset adjustment
• Rotate the latch case as illustrated for a backset of 2-3/4" (70 mm) or in reverse direction for
a backset of 2-3/8" (60 mm).
2
2-3/4" (70 mm)
Drive-in latch
7