AmazonBasics B07J4VK742 Manual Del Usuario página 9

Drive-in face plate installation
• Remove the original face plate.
Align the round face plate with the latch bolt and push it inside the latch bolt until you hear the
catch click.
Step 5: Install Latches
Bottom
handle latch
1. Insert the latches in the holes, parallel to the edge of the door. Mark the outline and remove the
latch.
2. Chisel 1/8" (3 mm) deep or until the latch face is flush to the door edge. Note: the cut-out must
be parallel to the edges of the door.
3. Insert the bottom latch and secure it with the wood screws.
Top deadbolt
latch
Chisel 1/8"
(3 mm) deep
9