Descargar Imprimir esta página

Brink 729507 Instrucciones De Montaje página 2

Publicidad

Installation of the towing electrics kit must be undertaken by
za specialist workshop or an appropriately qualified person.
Before starting work, you must read the installation instruc-
tions through completely. After installing the towing electrics kit, the
installation instructions should be kept with the vehicle service
documentation.
All claims under the guarantee will lapse in case of improper use or
modification of the towing electrics kit or any of its component parts.
When driving without a trailer or load carrier, any adapter installed must
be removed from the electrical socket. We reserve the right to alter the
design, content or colour. We accept no liability for any errors in these
instructions. All details and illustrations are non-binding.
87130695 / 24.10.2018 /
Subject to changes
17-18
In case of missing a rear fog lamp on the trailer, it should be retrofitted.
We accept no responsibility and give no guarantee for technical and electrical
modifications made after the initial operation of the towing electrics kit by the
vehicle manufacturer and which may lead, for example to malfunction of the
trailer socket or its peripheries.
The trailer module is not diagnostics-capable. If the manufacturer's diagno-
stics processes or software-supported test mechanisms generate error
reports directly or indirectly linked with trailer operation, the trailer module
must be disconnected from the leads to the trailer socket and a new diagnstic
process initiated.
3x
3x
3x
2x
10x
6-12
4, 13-16
5x
2/12

Publicidad

loading

Este manual también es adecuado para:

19130528