Operating The Dryer - Sears Kenmore ELITE 796.6141 Serie Manual De Usuario

HOW TO USE

OPERATING THE DRYER

All manuals and user guides at all-guides.com
1
Lint
Filter
2
3
4
5
6
CLEAN THE LINT FILTER
If the lint fi lter has not already been cleaned, lift out the fi lter
and remove the lint from the last load. This will help ensure the
fastest and most effi cient drying performance.
LOAD THE DRYER
Load the dryer with the wet laundry from the washer. If the
load is extra large, you may need to divide it into smaller
loads for proper performance and fabric care.
TURN ON THE DRYER
Press the POWER button to turn ON the dryer. The cycle LEDs
will illuminate and a chime will sound.
SELECT A CYCLE
Press the CYCLE buttons repeatedly to scroll through the cycle
selections until the desired cycle is selected. The standard
presets for the selected cycle will be shown in the display. On
MANUAL DRY cycles, these settings can be adjusted using the
cycle setting buttons anytime before starting the cycle.
NOTE: Not all options or modifi ers are available on all
cycles. Refer to the cycle guide page for default settings and
allowable options. A diff erent chime will sound and the LED
will not illuminate if the selection is not allowed.
BEGIN CYCLE
Press the START/PAUSE button to begin the cycle. The cycle
can be paused at any time by opening the door or by pressing
the START/PAUSE button. If the cycle is not restarted within four
minutes of being paused, the dryer will shut off and the settings
will be lost.
END OF CYCLE
When the cycle is fi nished, the chime will sound. Immediately
remove your clothing from the dryer to reduce wrinkling. If
WRINKLE GUARD is selected, the dryer will tumble briefl y
every few minutes to help prevent wrinkles from setting in the
clothes.
22