Factory Settings - LEGRAND Celiane 672 62 Guia De Inicio Rapido

Factory settings

When first powered up, pressing the
buttons controls all the opening points (roller
shutters or blinds) of the "In One by
Legrand" installation.
This option is provided so that the correct
operation and connection of all the shutters
can be checked.
Pressing LEARN (1) twice cancels this general
control fonction.
(1) Programming on learning button.
Operation
The switch is a :
Transmitter for simultaneously controlling, using the
of receivers that were linked to it during the learning
Learning can be performed equally on the
learned automatically.
When the centralized switch is linked to individual switches with preset,
pressing the STOP button opens each shutter at the level recorded on
the individual switch.
Pressing more time on
ked to the terminals of the shutter individual switches which have been
linked to it during the learning process.
(1) Learning : procedure that enables a scenario to be defined and
savecd.
8
(1) .
. The other buttons are
or allows to orientate the blind slats lin-
buttons, sets