Sanus VisionMount MF215 Manual Del Usuario página 16

2-2
1
3
5
16
[02]
[27]
[28]
Solid Concrete and Concrete Block Mounting – See Cautions in Step 2.
1. Level wall plate and mark the hole locations.
2. Drill pilot holes as illustrated.
3. Insert lag bolt anchors [27].
4. Place the wall plate [02] against the wall. Tighten the lag bolts [25]
only until the washers [26] are pulled fi rmly against the wall plate [02].
5. Place lag bolt covers [28] over lag bolts [25].
2
4
13mm 10mm
)
(1/2 in.) (3/8 in.
75 mm
3 in.
[02]
[26]
[25]
6901-002090 <00>