Descargar Imprimir esta página

Aiwa CDC-MP3RYZ Manual De Instrucciones página 10

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 26
USING RDS FEATURES
Receiving traffic announcements
Once the unit is set to TA (Traffic Announcement)
Standby mode, you can hear traffic
announcements as soon as they begin, if the unit
is in a mode other than MW or LW reception
mode.
1. Tune in an FM station.
2. Press TA to turn on the TP indicator and
enter TA Standby mode.
If the tuned-in station does not offer traffic
announcement service, the TP indicator
blinks. In this case, tune in another FM station.
3. Select a mode other than MW or LW reception
mode.
When a traffic announcement starts, the unit
automatically enters FM reception mode, and the
TA indicator lights. The frequency indicator also
displays the station name a few seconds later.
When the announcement is finished, the TA
indicator goes out, and the original source will be
heard.
During FM reception, press AF, then press TA to
turn on the AF and TP indicators. This function is
also available in CD or CD Changer Play mode.
If the signal strength of an alternative frequency
falls below a certain level, both the AF and TP
indicators blink.
This function is activated automatically when a
traffic announcement has begun on another
network, so you can listen to the traffic
announcement.
Traffic announcements are heard at a preset
level, regardless of the volume setting. This is
convenient when you want to hear no other
sources other than the traffic announcement.
When the listening volume is set lower than the
preset level, the volume increases to the preset
level.
Setting the preset level for TA mode
1. Press and hold AF for more than 2 seconds.
"BOOST 40" is displayed.
Adjust the volume using the Jog Dial.
The volume changes by five steps each time
the Jog Dial is rotated.
9
ENGLISH
2. Press SELECT to store the adjusted volume
in memory.
The volume will not be stored in memory if
SELECT is not pressed.
• When receiving traffic announcements, you
can increase the volume manually, but you
cannot decrease it, even though the
indicator changes.
Note
Each time you rotate the Jog Dial clockwise, the
sound increases in increments of five (45, 50, 55,
60, 65, 70, 75, 80).
Each
time
you
rotate
counterclockwise, the sound decreases in
increments of five (35, 30, 25, 20, 15, 10, 5, 0).
Receiving traffic announcements (while in a
mode other than MW or LW reception mode)
Press TA to turn on the TP indicator. The unit will
search for the TP station without disturbing the
current mode.
When a traffic announcement starts, the current
mode pauses, and you can hear the
announcement. When the announcement is over,
the previous mode resumes.
Note
If the CD changer is in the Repeat or Intro Play
mode before a traffic announcement begins,
normal CD play will resume after the
announcement is finished.
• Press TA to turn off traffic announcements and
return to the previous mode. This cancels TA
mode and restores the previous mode.
About urgent broadcasts (with AF, TA button OFF)
Even when playing a CD, the unit automatically
switches to Radio mode to receive urgent
broadcasts.
When the urgent broadcast is completed, the unit
automatically switches back to CD or CD Changer
Play mode (i.e., to the condition it was in prior to
the urgent broadcast). To cancel reception of an
urgent broadcast before the broadcast is finished,
you can:
• Insert a CD, thus switching to CD Play mode (if
a CD is already inserted, eject it and then
reinsert it).
• Press FUNCTION repeatedly to select the
desired play mode.
To listen to traffic announcements, press
FUNCTION repeatedly to switch to Radio mode,
then press TA.
the
Jog
Dial
tousi-E-10

Publicidad

loading