Mp3 Play - Aiwa CDC-MP3RYZ Manual De Instrucciones

MP3 PLAY

You can play MP3 files* written on CD-ROMs,
CD-Rs, or CD-RWs by following the procedure
below.
* An MP3 file stores audio data compressed
using MPEG1, the audio layer-3 file-coding
scheme. We call files that have the ".mp3"
extension " MP3 files."
1
Press OPEN to open the front panel,
then insert a CD-ROM, CD-R, or CD-RW
with the labeled side upward.
The unit starts scanning the disc.
2
Close the front panel.
During scanning of the disc, "NOW READING"
scrolls across the display.
The total number The total number
of Albums of Tracks
Notes
• It may take 2 minutes or more to scan a disc,
depending on the complexity of the folder
tree. If scanning does not finish within 2
minutes, "CANCEL TO EJECT KEY"
appears on the display. If you leave the unit
as it is, it will start scanning again.
• If there are no tracks (MP3 files) on the disc,
"NO MP3" appears.
After scanning, the total number of albums
and tracks appear on the display, then the
unit automatically starts playing the disc from
the first track of the first album.
13
ENGLISH
After playing a track, the unit plays the next track
of the same album.
After playing all the tracks of the album, the unit
plays the first track of the next album.
Notes
• If a disc is already inserted, press FUNCTION
repeatedly to select CD Play mode to start MP3
play.
• Be sure to close the front panel after inserting or
ejecting a disc.
CD-ROM indicator
To skip tracks and albums
Press
9
0
ALBUM/DISCN Skip to the next album
ALBUM/DISCM Skip to the previous album
To switch modes
To switch to another mode, press FUNCTION.
If you play the disc again after switching to
another mode or turning off the unit, the unit will
continued
start playing the disc from the beginning of the
track previously played.
Album number Track number
Each time the track is changed, this display
appears and remains for 5 seconds.
Elapsed playing time
To
Skip to the next track
Skip to the beginning of the
current track or the previous
track
tousi-E-14