Caracteristiques Techniques - Skil F0154600 Serie Manual Original

USE
• On/off 7
• Switch locking for continuous use 8
• Changing saw blades 9
! disconnect the plug
• Operating the tool
! securely clamp the workpiece
- hold tool firmly with both hands, so you will have full
control of the tool at all times
- before switching on the tool, ensure that front end of
footplate rests flat on the workpiece
- switch on the tool
! the tool should run at full speed before the blade
enters the workpiece
- keep footplate D 2 firmly against the workpiece to
minimize counter-force and vibration
! ensure that the blade has come to a complete
standstill, before you lift the tool from the
workpiece
• Dust blowing q
• Holding and guiding the tool
! while working, always hold the tool at the grey-
coloured grip area(s) w
- keep ventilation slots E 2 uncovered
- do not apply too much pressure on the tool; let the tool
do the work for you
• USE OF TOOL AS RECIPROCATING SAW e
- slide knob F forward to unlock handle G
- pull handle G upwards until it snaplocks
- insert blade to full depth with teeth facing backwards
- ensure that the saw blade extends beyond the work
throughout the stroke
- do not make plunge cuts
• USE OF TOOL AS JIG SAW r
- slide knob F forward to unlock handle G
- push handle G downwards until it snaplocks
- insert blade to full depth with teeth facing forward
- for an accurate straight cut, guide tool with footplate
along the edge of a straight piece of wood
- pre-drill a hole before making cut-outs
APPLICATION ADVICE
• Use the appropriate saw blades t
! tool accepts most commonly available T- and
U-shank jig saw blades as well as standard
reciprocating saw blades y
• When cutting metals, lubricate saw blade regularly with
oil
• Splinter-free cutting
- cover cutting-line with several layers of wide tape
before cutting
- always face the good side of the workpiece down
• For more tips see www.skil.com
MAINTENANCE / SERVICE
• This tool is not intended for professional use
• Always keep tool and cord clean (especially ventilation
slots E 2 )
! disconnect the plug before cleaning
• If the tool should fail despite the care taken in
manufacturing and testing procedures, repair should
be carried out by an after-sales service centre for SKIL
power tools
- send the tool undismantled together with proof of
purchase to your dealer or the nearest SKIL service
station (addresses as well as the service diagram of the
tool are listed on www.skil.com)
ENVIRONMENT
• Do not dispose of electric tools, accessories and
packaging together with household waste material
(only for EU countries)
- in observance of European Directive 2012/19/EC
on waste of electric and electronic equipment and
its implementation in accordance with national law,
electric tools that have reached the end of their life
must be collected separately and returned to an
environmentally compatible recycling facility
- symbol 6 will remind you of this when the need for
disposing occurs
NOISE / VIBRATION
• Measured in accordance with EN 62841 the sound
pressure level of this tool is 88 dB(A) and the sound
power level 99 dB(A) (standard deviation: 3 dB), and the
vibration . (triax vector sum; uncertainty K = 1.5 m/s²)
. cutting chipboard 17.7 m/s²
. cutting wooden beams 12.3 m/s²
. cutting metal 18.8 m/s²
• The vibration emission level has been measured in
accordance with a standardised test given in EN 62841;
it may be used to compare one tool with another and as
a preliminary assessment of exposure to vibration when
using the tool for the applications mentioned
- using the tool for different applications, or with different
or poorly maintained accessories, may significantly
increase the exposure level
- the times when the tool is switched off or when it is
running but not actually doing the job, may significantly
reduce the exposure level
! protect yourself against the effects of vibration by
maintaining the tool and its accessories, keeping
your hands warm, and organizing your work
patterns
Scie sabre / sauteuse
INTRODUCTION
• Cet outil est conçu pour la découpe du bois, du plastique,
et du métal, ainsi que pour l'élagage et l'ébranchage ; il
convient pour les coupes droites et curvilignes
• Cet outil n'est conçu pour un usage professionnel
Lisez et conservez ce manuel d'instruction 3
•

CARACTERISTIQUES TECHNIQUES 1

11
4600