Installation Instructions; General Advice - BIEMMEDUE FJ 16 Manual De Instrucciones

Before using the fan, carefully read all of the instructions and follow them scrupulously. The manufacturer cannot be held
responsible for damage to persons and/or property caused by improper use of the equipment.
This instruction manual is an integral part of the equipment and must therefore be stored carefully and passed on with the unit in
the event of a change of ownership.
1. DESCRIPTION
The axial fans described in this manual are designed for combined
operation with the space heaters in order to evenly distribute the hot
air flow in the room to be heated.
The hot air flow is moved by a high-efficiency fan unit and is
distributed in the room only after it has passed through an air flow
rectifier that:
• efficiently contains the turbulent motion generated by the fan
blades;
• increases the air launch generated by the fan.
The FJ 16R TP model is fitted with a reversible fan used to run the
fan with either clockwise or anti-clockwise rotation, based on the
selected direction for the fan air flow.
2. CONDITIONS OF SUPPLY
The axial fan is delivered in a cardboard box and can be handled
easily with a manual or automatic forklift with capacity exceeding
200 kg.
Warning
NEVER TRY TO LIFT IT BY HAND: its weight could cause
significant physical harm.
It contains:
• N. 1 axial fan.
• 1 instruction and maintenance booklet
• 1 booklet with drawings and spare parts list

3. GENERAL ADVICE

The equipment must be installed and used in conformity to all
national and local laws and regulations in force in the country of
installation.
General guidelines:
• Follow the instructions in this booklet very carefully;
• Do not install the fan in places where there is a risk of fire or
explosion;
• Keep inflammable material at a safe distance from the fan
(minimum 3 metres);
• Check that there is no overheating of walls, ceilings or floors made
of inflammable materials;
• All fire prevention regulations must be complied with;
• Check the fan before switching it on and at regular intervals
during its use;
• After use, make sure the disconnecting switch is off.
Warning
This unit may not be used by persons (including children)
with reduced physical, sensorial or mental capacities or
with limited experience and familiarity unless they are
under supervision or instructed on how to use the unit by
the person responsible for its safety.
L-L 201.02-BM
EN
IMPORTANT
Warning
All of the operations described in this section must be
performed by professionally qualified personnel only.
4.0. FJ 16R TP MODEL
Warning
The FJ 16R TP model is supplied without a safety grille
and it is a partly completed machine (according to EU
Directive 2006/42). It is supplied with a CE declaration of
incorporation.
Therefore, before installation the residual risk needs to be assessed
(1.3.7. Risks related to moving parts), and the measure considered
necessary needs to be adopted (installing safety grilles, use of
guards, etc.) and compliance of the machine to the essential safety
requirements described in the EU Directive 2006/42 needs to be
verified).
Warning
A CE declaration of conformity must be completed and
issued
responsibility of the installer.
4.1. CEILING INSTALLATION
The axial fan must be installed by attaching it to the ceiling with
ropes and/or chains of appropriate size and length, to be attached
to the four suspension points
Warning
Make sure that the ropes and/or chains form an angle not
more than 5° with vertical to the ceiling, that the ropes do
not cross, and that a different rope is used for each hook.
The minimum distance from surrounding walls, floor and/or ceiling
must always be at least 1 metre: this minimum distance must be at
least 2.5 m, only for the FJ 16R TP model.
4.2. POWER CONNECTIONS
Because the fan is intended for combined operation, the electrical
connection must ensure that the fan starts when the space heater

4. INSTALLATION INSTRUCTIONS

before installation, this is the exclusive
13 / 22