Installing The Simplicity Infant Carrier On A Silver Cross Travel System; Using The Simplicity Infant Carrier As A Rocking Seat; Using The Simplicity Infant Carrier As A Baby Seat; Looking After Your Simplicity Infant Carrier - Silver Cross SIMPLICITY INFANT CARRIER Manual De Instrucciones

Tabla de contenido

Publicidad

20
Installing the Simplicity
Infant Carrier on a Silver Cross
travel system
The Simplicity Infant Carrier is
designed to fit specified Silver
Cross pushchairs. Please refer to
your pushchair instructions.
Using the Simplicity Infant
Carrier as a rocking seat
Place the Simplicity Infant Carrier
on a level floor surface. Move the
handle making sure the handle
firmly clicks into the rocking
position (see page 8).
Your baby must be harnessed
into the infant carrier and
never left unattended.
Using the Simplicity Infant
Carrier as a baby seat
Place the Simplicity Infant Carrier
on a level floor surface. Move the
handle making sure the handle
firmly clicks into the stable position.
You can now use the Simplicity
Infant Carrier as a baby seat.
Your baby must be harnessed
into the infant carrier and
never left unattended.
Looking after your
Simplicity Infant Carrier
Removing the covers
You must never use your
Simplicity Infant Carrier
without the manufacturer's cover.
It is an important safety feature of
the infant carrier.
To remove the cover, open the
velcro fastening chest pads and
remove.
First remove the head support
cover by opening the two press
studs and remove the head support
cover from the plastic insert.
To remove the cover, undo the
two press studs, undo the harness
buckle and then pull out the eight
connecting studs situated at the
sides of the cover. Slide the harness
and buckle through the cutouts
in the cover, pull the cover over
the sides of the infant carrier and
remove the cover.

Publicidad

Tabla de contenido
loading

Tabla de contenido