Velleman HAM222 Manual Del Usuario página 4

 The powerful and accurate microwave sensor will detect movement
even behind non-metal PVC or wooden walls or doors. It is not
recommended to install the alarm module behind or near metal panels
or near interfering signals.
 Make sure the installation spot is flat, dust-free, protected from rain and
other weather elements, and not prone to vibrations.
 Install the alarm module in a spot where the device cannot be tipped
over.
6. Operation
1. Make sure the alarm module is powered and the batteries are installed
in the remote control.
2. Switch on the alarm module, either through the alarm module itself or
through the remote control. The ARM LED will light after 10 seconds to
indicate the alarm module has entered the armed mode.
3. Select the alarm type (barking, alarm or doorbell) and set the volume
level.
The alarm sound is very loud. Keep the alarm
module at a safe distance and protect your
When the device is armed, the module will detect human movement
and emit an alarm sound. Press the on-off button once to switch off
the alarm sound. Remember to alarm module will still be armed.
You can also sound the alarm by pressing the SOS button on the
remote control.
4. Press the on-off button twice to switch off the device after use.
V. 03 – 08/06/2017
HAM222
WARNING
ears when testing.
4 ©Velleman nv