Sinbo SHC 4344 Manual Del Usuario página 8

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

ENGLISH
Dear Customer
Please read this user manual carefully before using your curling brush,
paying particular attention to the safety notes on this and the following page!
Keep the user manual safe for future reference and also to pass on to any
subsequent owner.
PLEASE ALSO NOTE THE FOLLOWING
• During charging ,the clipper should be placed in a position where there is
no contact with moisture,water or other liquids possible.
• Never try to remove foreign bodies from the inside of the clipper with a
pointed tool(e.g.tail comb).
• Always switch off the clipper before putting it down and between cutting
operations.
• Protect the cable from damage.Do not pull the cable.If the cable should
become damaged,contact the Serviece Department.The battery charing stand
can be ordered as a spare part from the Service Department.
• Do not allow the cable to come into contact with hot surfaces.
• Do not touch the moving blades whilst the clipper is swithced on.
• Do not use the clipper if the cutter set is damaged or broken,otherwise
injuries could occur.
• The appliance should not be exposed to temperatures below0C or
above+400Cfor any great length of the time.Avoid exposure to direct sunlight.
• Always turn the appliance off while it is being recharged(the "0" must be
visible)
• Electrical appliances are not children's toys.Never allow a child to touch
electrical equipment.
• If any problems or irregularities arise while the appliance is being used it
must be switched off and the plug should be pulled out of the socket.Send the
complete clipper with the adapter to the Service Department to be checked.
• No accessories or battery charging stands other than those supplied by may
be used.
• Stubborn marks on the casing can be removed with a cloth moistened with
normal household cleaning spirit.Beware inflammable!Never use petrol,paint
thinners or abrasive cleaning agents.
- 7 -

Publicidad

Tabla de contenido
loading

Tabla de contenido