Hummer H3 2006-2010; Kit Assembly; Double Din Radio Provision - Metra INST-3304 Instrucciones De Instalación

DASH DISASSEMBLY
Hummer H3 2006-2013
1. Unclip and remove trim panel around
radio and A/C controls. (Figure A)
Remove (4) 9/32" screws securing the
2.
radio. (Figure B)
Unplug and remove radio.
3.
Continue to Kit Assembly
(Figure A)
(Figure B)

KIT ASSEMBLY 95-3304

Double DIN radio provision

1. Slide the appropriate bracket into the
trim plate, aligning the holes in the trim
plate to the clips on the bracket. (Figure A)
2. Slide the DDIN radio unit into the trim
plate bracket assembly and secure the
unit to the kit using the screws supplied
with theaftermarket radio. (Figure B)
3. Locate the factory wiring harness in
the dash. Metra recommends using the
proper mating adapter from Metra or
AXXESS.
4. Re-connect the negative battery
terminal and test the unit for proper
operation.
5. Reassemble dash in reverse order of
disassembly.
(Figure A)
(Figure B)
REV. 8/27/2021 INST-3304
3