Stacked Iso Din Radio Provision - Metra INST-3304 Instrucciones De Instalación

KIT ASSEMBLY 95-3304

Stacked ISO DIN radio provision

1. Slide the appropriate bracket into the trim
plate, aligning the holes in the trim plate
to the clips on the bracket. (Figure A)
Slide the stacked ISO DIN units into the
2.
trim plate bracket assembly and secure
the unit to the kit using the screws
supplied with the aftermarket radio.
(Figure B)
Locate the factory wiring harness in
3.
the dash. Metra recommends using the
proper mating adapter from Metra or
AXXESS.
4. Re-connect the negative battery
terminal and test the unit for proper
operation.
5. Reassemble dash in reverse order of
disassembly.
4
(CONT.)
(Figure A)
(Figure B)
|
386.257.1187 MetraOnline.com