iSi 185001 Thermo Xpress Manual Del Usuario página 19

EN
The device is a pressure vessel. Dropping
and/or damage turn it into a source of hazard
and it may not be used again. Have the
device checked by the iSi service center.
Only disassemble the iSi Thermo XPress Whip
in accordance with "Thorough cleaning"
Check the material compatibility of any
cleaning/disinfectant solution that is used.
Do not carry out any alterations to the iSi
Thermo XPress Whip. This will invalidate
the warranty and lead to exclusion of
liability.
Read the instructions for use thoroughly
and store it in a safe place to avoid operating
errors.
Only use original iSi Cream Chargers.
Proper cleaning is a mandatory requirement
in order to avoid the whipper becoming
blocked. Check that the iSi Whipper has been
properly cleaned before use.
Never use more chargers than specified
and never overfill the whipper. This will
ensure that the specified maximum
operating pressure is not exceeded.
If the pressure will not release, please
contact iSi or your service center.
9