J.P. SELECTA ST DRY PV 12 Manual De Instrucciones página 34

3.14【Set left margin】
[Format] ASCII
Hex
Decimal
[Range] 0 nL

0 nH

[Description] Set the left margin using nL and nH. The left margin is set to
[Notes] This command is effective only when processed at the beginning of the
line in standard mode.
The setting could not exceed the printable area.
[Default] nL = 0, nH = 0
3.15【Set printing area width】
[Format] ASCII GS W nL nH
Hex
Decimal29 87 nL nH
0 nL 255
 
[Range]
0 nH
 
[Description] Sets the printing area width to the area specified by nL and nH.
[Notes] This command is effective only when processed at the beginning of the
line.
The setting by GS L takes precedence over the setting by GS W. If
the [left margin + printing area width] exceeds the printable area, the
printer uses [Printable area width ‐ left margin].
GS L
1D 4C
29 76
255

255

[(nL nH 256)

+
1D 57 nL nH
255
The printing area width is set to [(nL
nL nH
nL nH
nL nH
0.125 mm].

H
 256)  0.125mm]
+ n
34