J.P. SELECTA ST DRY PV 12 Manual De Instrucciones página 38

3.22【Set bar code width】
[Format] ASCII
Hex
Decimal 29 119
[Description] Set the horizontal size of the bar code.
n specifies the bar code width as follows:
n The width of bar code （mm）
2 0.250
3（Default） 0.375
4 0.5
The bar code cannot be identified, when the width of bar code exceed the
printable area.
3.23【Select bar code height】
[Format] ASCII
Hex
Decimal
[Range]
0 n

[Description] Select the height of the bar code.
[Default] n = 162
3.24【Select printing position for HRI characters】
[Format] ASCII
Hex
Decimal
[Description] Select the printing position of HRI characters when printing a bar
code.
n selects the printing position as follows:
n Printing position
0 Not printed
2 Below the bar code
[Notes] HRI characters are printed in centering.
GS w n
1D 77 n
n
GS
1D
29 104
255

n specifies the number of dots in the vertical direction.
GS
1D
29
HRI indicates Human Readable Interpretation.
h n
68 n
n
H n
48 n
72 n
38