Electrolux JONSERED 560 Manual De Instrucciones página 7

Plastic Box
1. Position the two grassbox
halves together and press
each location point (K1)
into position without fully
connecting the clips.
When the location points
are matched correctly
firmly press the grassbox
together until all clips are
securely connected.(K2)
2. To attach the grassbox to
your lawnmower, lift the
safety flap (K3) and make
sure the discharge chute is
clean and free from debris.
3. Locate fully assembled
grassbox onto 2 location
points at the rear of the deck
(K3).
4. Locate safety flap onto the top
of the grassbox. Ensure the
grassbox is securely located.
(K4)
• Removal is the reverse
procedure.
Fabric Bag
1. Insert 'U' frame into top,
ensuring the small metal
pip (L2) is securely located
(L3).
2. Attach 'U' frame to fabric
bag (L4).
3. Locate fully assembled
grassbox onto 2 location
points at the rear of the deck
(L5).
4. Locate safety flap onto the
top of the grassbox.(L5)
Ensure the grassbox is
securely located.
• Removal is the reverse
procedure
GB
ASSEMBLY INSTRUCTIONS
K1
location
point
K3
Please Note
Ensure no gap
L1
remains
between the
safety flap and
the
grassbox/bag
Where grass
collection is
'U' frame
not required
you can use
L2
the
lawnmower
without the
grassbox/bag.
Ensure the
safety flap is
fully closed
L4
Grassbox Assembly - Plastic Box
K2
clips
K4
Grassbox Assembly - Fabric Bag
top
L3
L5
fabric bag
4