Tabla de contenido
Publicidad
Electrical Safety and Installation Requirements
This Class B digital apparatus meets all requirements of the Canadian Interference-
Causing Equipment Regulations.
Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le
matériel brouilleur du Canada.
RADIATED ENERGY
RFI Emission
WARNING: This product requires shielded cables to comply with Class B emission limits. If
not used with shielded cables, this product may cause radio interference in which case the
user may be required to take adequate measures.
Immunity
Electrical Safety
Laser
SAFETY
ELECTRICAL NOTICES
WARNING: ELECTRIC SHOCK HAZARD
To prevent ELECTRIC shock, do not remove cover. No user-serviceable parts inside. This
unit contains HAZARDOUS VOLTAGES and should only be opened by a trained and qualified
technician. To avoid the possibility of ELECTRIC SHOCK disconnect electric power to the
product before connecting or disconnecting the LAN cables.
This is a "CLASS 1 LED PRODUCT"
LIGHTNING DANGER
DANGER: DO NOT WORK on equipment or CABLES during periods of LIGHTNING
ACTIVITY.
CAUTION: POWER CORD IS USED AS A DISCONNECTION DEVICE. TO DE-ENERGISE
EQUIPMENT disconnect the power cord.
INSTALLATION
ELECTRICAL - AUTO VOLTAGE ADJUSTMENT
This product will automatically adjust to any voltage between the ranges shown on the label.
ELECTRICAL - TYPE CLASS 1 EQUIPMENT
THIS EQUIPMENT MUST BE EARTHED. Power plug must be connected to a properly wired
earth ground socket outlet. An improperly wired socket outlet could place hazardous
voltages on accessible metal parts.
ELECTRICAL - CORD NOTICE
Use power cord, maximum 4.5 meters long, rated 5 amp minimum, 250V, made of <HAR>
cordage molded IEC 320 connector on one end and on the other end a plug approved by the
country of end use.
16
Canadian Department of Communications
EN55022 Class B
EN50082-1
TUV-EN60950, UL1950, CSA 950
EN60825
Publicidad
Tabla de contenido
