English - Kenwood AT644 Instrucciones

English

Use the fruit press to extract juice key
from soft fruits and berries.
pusher
hopper
before using your Kenwood
feed tube and body
attachment
scroll
● Read these instructions carefully and
filter
retain for future reference.
retainer
Remove all packaging.
●
juice outlet
safety
filter cover
filter sealing ring
Never put your fingers in the feed
●
pulp adjuster nozzle
tube. Only use the pusher supplied
with the fruit press attachment.
IMPORTANT
● Do not over fill the feed tube or use
If you buy an AT642 pack
excessive force to push the food
(consisting of an AT643 roto
down the feed tube – you could
food cutter and the AT644 fruit
damage your attachment.
press), only one body is
Always unplug before unblocking the
●
supplied for use with both
feed tube.
attachments.
● Never use the attachment without
the hopper fitted. to assemble your fruit
Do not process frozen fruit or
●
press
vegetables. Allow to defrost before
processing.
1 Fit the scroll inside the body.
● Do not touch moving parts.
2 Fit the filter to the body – align the
● Do not use the attachment if the
locating tab
filter is damaged.
body.
Unplug the appliance before fitting or
●
3 Lock the filter cover in position by
removing parts or cleaning.
holding by the retainer
anti-clockwise until the locating line
Refer to your main Kitchen Machine
is directly underneath the line on the
instruction book for additional safety
body
warnings.
4 Fit the pulp adjuster nozzle.
This appliance conforms to EC
●
directive 2004/108/EC on preparing food
Electromagnetic Compatibility and ● Remove stones (plums, peaches,
cherries etc).
EC regulation no. 1935/2004 of
27/10/2004 on materials intended Remove tough skins (melons,
●
for contact with food. pineapples, cucumbers, etc).
● Soft-skinned and other foods just
before using for the first time
need washing (apples, pears,
1 Wash the parts: see 'Cleaning'.
spinach, grapes, strawberries etc).
2
with the slot in the
and turn
.