Cleaning And Maintenance - Concept VS5100 Manual De Instrucciones

EN
Using the remote control
Point the remote control on the receiver on the fan body and press the desired button. The remote control operates at
a distance of up to 5 metres at an angle of +/- 30°.
Before discharging the remote control, remove the batteries and safely dispose of them.
Engine overheat protection
The motor winding has a thermal fuse which, if overheated, burns and the fan stops operating. The engine temperature
stops to rise, preventing deformation of the plastic parts of the appliance if, for any reason, the engine overheats.
Buttons in the appliance body / control panel (Fig. 6)
The buttons such as ON/OFF, SPEED, MODE, TIMER, ROTATION on the
appliance body perform the function as the corresponding buttons on the
remote control.

CLEANING AND MAINTENANCE

Fig. 6
Before each cleaning of the appliance, unplug the power cord from the electrical outlet!
To clean the surface of the appliance, use only a damp cloth, no detergents or hard objects, as they can damage the
surface of the appliance!
Clean and inspect the input and output grids of the appliance frequently to ensure good operation of the appliance.
Never clean the appliance under running water, do not rinse it or immerse it in water!
If the fan is dismantled, proceed in the reverse order of installation.
0 VS5100/VS5110
37