Operating Instructions; Controlling The Roboshooter - THINK GIZMOS ROBOSHOOTER TG542-VR Manual Del Usuario

2. OPERATING INSTRUCTIONS

2.1 Controlling the RoboShooter

● Load the batteries in the RoboShooter and Remote.
● Turn on the RoboShooter using the on/off switch on the back of the robot, the robot will
speak and light up.
● Turn on the Remote Control using the on/off switch on the back, the red light on the
remote will flash and when connected the robot will say "Greetings Master! I am yours to
command" and raise his gun arm.
● Use the remote control to control the robot.
● If you don't issue orders to him for a period of time he will say "Master I will sleep now to
save power turn me on again to wake me" and go into sleep mode.
● To get him out of sleep mode switch the robot off and on again.
Walk & Slide Function:
Press the forward and backward buttons on the
left section of the controller, the robot will walk
forwards and backwards correspondingly.
Press the forward and backward buttons on the
right section of the controller, the robot will slide
forwards and backwards correspondingly.
Turn Function:
Press the left and right arrow buttons on the left
section of the controller, the robot will turn to
the left and to the right correspondingly.
Dance Function:
Press the dance button on the controller, the
robot will do a cool dance and play music.
5