Controlling The Roboshooter Continued - THINK GIZMOS ROBOSHOOTER TG542-VR Manual Del Usuario

2.2 Controlling the RoboShooter Continued

Blaster Function:
Press the blaster button on the controller, the
robot will lift the blaster and say "Freeze! Identify
yourself. Or I will shoot".
Press it again and the robot will raise the blaster
in the air, shoot and say "Surrender now" You
are under arrest".
Loading Discs:
As illustrated, pull the head up from the front,
and then insert the discs into the hole.
Please do not use any other objects other than
the supplied discs, if the discs do not fire as
expected, take out all discs and reload them
making sure they are flat and level.
Firing Discs:
1. Install the discs as shown.
2. Make sure the robot and remote are powered
on.
3. Press the disk button on the remote, the robot
will say "Disk Laser Power On" and the motor will
start.
4. Press the disk button to fire the discs.
5. One disk will fire with each press of the
button.
6. Pressing any button other than the disk
button will disable the firing motor.
6