Error Conditions - Citizen SRP-280N Manual De Instrucciones

Base–n

Error Conditions

Error message will appear on the display and further calculation
becomes impossible when any of the following conditions occur.
DOMAIN Er
DIVIDE BY 0
OVERFLOW Er
STAT Er
SYNTAX Er
NO SOL
MULTI SOLS
NO REAL SOL
LENGTH Er
OUT OF SPEC
To release the above errors, please press [ CL ] key.
File name : CBM_SR285,A_HDBSR285T19_English.doc
version : 2010/04/26
DEC :
– 2147483648 ≤ x ≤ 2147483647
BIN :
10000000000000000000000000000000 ≤ x ≤
11111111111111111111111111111111 (for negative)
0 ≤ x ≤ 01111111111111111111111111111111
(for zero, positive)
OCT :
20000000000 ≤ x ≤ 37777777777(for negative)
0 ≤ x ≤ 17777777777 (for zero or positive)
HEX :
80000000 ≤ x ≤ FFFFFFFF (for negative)
0 ≤ x ≤ 7FFFFFFF ( for zero or positive)
(1) When specifying an argument to a function
outside the valid range.
(2) FREQ value (in 1–VAR stats) < 0 or
non-integer.
(3) When USL value < LSL value
You attempted to divide by 0.
When result of function calculations exceeds
the range specified.
When in MAIN, CPLX, VLE, or QE mode, press
[ DATA ] or [ STATVAR ].
(1) Input errors are made.
(2) When improper arguments are used in
commands or functions that require
arguments.
There is no solution or infinite to the
simultaneous equation under VLE mode.
There is no real solution to quadratic equation
under QE mode.
An entry exceeds 84 digits after implied
multiplication with auto-correction.
You input a negative C
USL – X
,
C =
PU
3 σ
E – 10
or C value, where
PU PL
X – LSL
C =
PL
3 σ