English - Focal TWU15 Manual Del Usuario

INTEGRATION UNIVERSAL
M a n u e l d ' u t i l i s a t i o n / U s e r m a n u a l
Please validate your Focal-JMlab warranty,
it is now possible to register your product online: www.focal.com/warranty
Warning
Listening for a prolonged period at a high volume level over 110 dB may result in hearing loss. Exposure, even brief, to sound at
over 130 dB may result in irreparable hearing loss.
Important recommendations
First of all, check the space available for the loudspeakers (see the plans on the packaging) and then start cutting. If the
loudspeakers are to be mounted in their original place, check whether there is enough space between the loudspeaker and the
protective grating.
• Keep the loudspeakers away from metal chips and dust.
• Clean carefully prior to mounting the loudspeakers.
Warranty conditions
If you encounter problems, contact your Focal distributor first. For all Focal equipment, the warranty applicable to France covers
a 2-year period as of the purchase date and is non-transmissible in case of resale. In the event of faulty equipment, it should be
sent, at your own expense, in its original packaging to your distributor, who will then check the equipment and determine the
nature of the problem. If it is under warranty, the equipment will be returned to you or replaced "postage paid". Otherwise, a
quote for repair will be sent to you. The warranty does not cover damage arising from improper use or incorrect connection (e.g.
burned voice coils...)
Environmental information
Your Focal-JMlab product has been designed and manufactured using high quality materials and components, which
can be recycled and reused. This symbol signifies that the electrical and electronic devices, at the end of their life,
should be disposed of separately from household waste. Please take this device to the local collection point or to a
recycling centre. You will thus contribute to environmental conservation.
Tweeter installation (ISU130, ISU165, ISU200, ISU570, ISU690)
There are three possible mounting options :
Tilted mounting : (Fig. A1)
Drill a hole for the cables and screws in the desired location, fix the mount in place using the screws provided with the kit, route
the 2 wires through, then, fix the tweeter to its housing (close-fitting). These operations can be carried out with the tweeter grille
in place.
Flush mounting : (Fig. A2)
Cut out a hole the same diameter as the tweeter in the desired location. Then, insert the tweeter.
Installing in the factory locations : (Fig. B)
Unscrew the plastic cover at the rear of the tweeter by rotating it to the left (towards the "unlocked" symbol / Fig.B). The tweeter
is ready to be mounted alone into the factory location.
Note: the "+" is indicated by a red line.
Handle with care: do not touch the dome or let it come into contact with the rear of the vehicle's original grille.
Wiring the tweeters: (Fig. C)
If wiring to a display stand, connect the "display" wire.
If wiring to a vehicle: connect the "car" wire.
The wire with the "-" symbol is the negative wire in both cases.

English

7
English