Uline H-674 Manual Del Usuario

H-674, H-932
TAPE DISPENSER WITH
RETRACTABLE BLADE
1. Place dispenser on flat surface. Push tape roll fully onto
tape wheel. Be sure tape unwinds with sticky side down.
(See Figure 1)
2. Unroll 5-6 inches of tape (sticky side down) and thread
between smoothing roller and metal loading gate.
(See Figure 2)
3. Pull tape over smoothing roller allowing tape to unroll
freely off tape wheel. (See Figure 3) To unwind tension,
see Figure 4.
Figure 1
A
PAGE 1 OF 3
1-800-295-5510
uline.com
PARTS
Tape Pressing
Wiper
Tape Smoothing
Roller
Tape Cutting
Blade
Adhesive Side
Of Tape Down
Metal Loading Gate
OPERATION
Figure 2
Adjustable
Unwind Tension
Knob
4. Start desired depth on the side of the box.
(See Figure 5, A)
5. Glide dispenser along the carton seam - smoothing
roller automatically presses tape to the package.
(See Figure 5, B)
6. Continue down the opposite end to desired length.
In one motion, tilt dispenser forward so tape pressing
wiper stops rolling tape, serrated blade cuts tape and
wiper smoothes the tape end. (See Figure 5, C)
B
Para Español, vea página 2.
Pour le français, consulter les page 3.
Figure 3 Figure 4
Figure 5
C
0621 IH-674