Starting Up The Unit; Function Selection - Bergstrom DAF Cool Ultimate 1547472 Manual Del Usuario

DAF COOL ULTIMATE
EN
Registering the remote control:
With the unit switched off, hold down the
symbol flashes on the display; when it stops flashing, press the
remote control within 30 seconds or the whole operation will have to be repeated.
Removing the remote control:
With the unit switched off, hold down the
symbol flashes on the display; when it stops flashing, press the
panel within 30 seconds or the whole operation will have to be repeated.

Starting up the unit

To switch on DAF Cool Ultimate press the On/off key on the control panel
on the remote control of the unit
automatic function F4 selected and with the factory settings and will show the symbol
CA on the display.

Function selection

To select a function, press and hold down the
the unit switched off. The display will then show the unit's different functions (F0, F1,
F2 etc.). To select a function, release the
appears.
Function F0 - Manual Operation
When selecting the F0 function, the display shows the selected temperature and allows
the user to choose the desired comfort temperature between 15ºC (59º F) and 27ºC
(71º F). While the unit is in operation, the display will show the selected temperature.
The unit's blower speed can also be varied between 5 different speeds marked V1 to
V5 .
The comfort temperature can be selected by briefly pressing the
control panel or the
key on the control panel until the C
key on the control panel until the C
. DAF Cool Ultimate will always start with the
ON/OFF
On/off key when the desired function
keys on the remote control.
10
On/off key on the
ON/OFF
key on the control
On/off key on the control panel with
or
keys on the