Safety
Intended use
•
The DIN-rail timer and channel extension are intended solely for switching electric devices in pri-
vate and commercial areas, provided this does not infringe on the intended use of these devices.
•
The channel extension only functions in combination with the DIN-rail timer.
•
The channel extension may only be installed on DIN rails.
•
Only use the channel extension in dry rooms and do not install close to devices with inductive
discharge (motors, transformers, etc.).
The intended use also includes compliance with all information specified in this manual.
Any use other than the intended use is considered incorrect use. The legal warranty is voided by any
interference with, or modifications to, the device.
26