Volvo 31664113 Manual Del Usuario página 12

EN Kayak holders
Fastening kayak holders on oval or wing profile load carrier
─ Release the catches so that the kayak
holder can be adapted to the bottom profile
of the kayak.
10
─ Adjust the kayak holders laterally. Make
sure that the bottom of the kayak does not
make contact with the oval/wing profiles.
Once all adjustments to the holders have
been made and they are locked in their final
position:
─ Take the rubber seals that were removed
from the T-tracks earlier and measure out
suitable lengths for the parts of the T-track
not in use by the holder.
─ Cut the rubber seal in these lengths and fit
the pieces in the T-track. This prevents
noise from wind in the T-track when driving
with oval or wing profile load carriers.
Save all rubber seal pieces. They can be
combined in various manners if the load
carriers are to be used with other mountings
or holders.