EN Bicycle holder, towbar mounted
Introduction
Note!
Regularly check that the bicycle holder
is secured on the towbar and that the
bicycles' securing devices are properly
tightened.
Check that the bicycle holder is properly
locked and the key removed before
travelling.
Note that wind noise can occur when
the bicycle holder is installed.
14
Note!
Speed should be adjusted according
to the load being transported and of
course according to the applicable
speed regulations, though not more
than 130 km/h.
Be aware of the change in the car's
length and its driving characteristics
with the bicycle holder.
– Maximum load: 60 kg (ball pressure
load).
– Its weight: 16.9 kg.
– Maximum weight per bicycle: 30 kg.
– The vehicle driver has the sole
responsibility for the product being free
from defects and securely fastened.
– Before a journey, the function of the
lighting unit lights must be checked.
– Do not leave any loose items on the
bicycles during transportation.
– Check that the straps and other
mountings are secure and post tighten
as necessary.
– The length of the car increases when
the bicycle holder is installed. The
bicycles can add to the width and height
of the car. Take care when reversing.
– Replace any worn or damaged parts
immediately.